Home Topics Company Information Product & Servise General Index Site Map Contact US

Japanese


PPB COUNTAC

PPB COUNTAC is packaged type of packed bed demineralizer applying counter current regeneration method.
As the packed bed system has less free board which allows only the volume change of the resin bed between exhausted and regenerated form, there is no disturbance in the resin bed and ion exchange band is kept firmly.
Then ideal counter current regeneration system can be achieved.

< Advantages >

Shortening the regeneration time at half of the existing plant
  As monosphere beads of ion exchange resin which gives not only high reaction rate but also good rinse characteristics, the regeneration time is reduced at half of the existing plant ( about 50 minutes ).
Special resin bed supporting material the most suitable for the packed bed system is filled.

Reducing the operating cost at half of the existing plant
  There occurs a lot of loss when the plant is regenerated by constant predetermined quantity of the service run while the regenerated form remains. If ABC ( Anion-Break-Combined ) detecting system is adopted at your option, the regenerated form in the resin bed can be utilized completely. This ABC system in addition to high chemical efficiency
saves the operating cost extremely.

Reducing the waste water at half of the existing plant
  As it requires no blocking water to keep the resin bed fixedly during upwards regeneration and concentrated chemical can be used, the waste water volume is reduced at half of the existing plant.
It contributes to reduce the environmental loads.

Downwards service allowing ON-OFF operation
  Our system does not affect the quality and the quantity of the product, even if it is operated on and off.
Residual ion is kept at sub ppb level without polishing unit.
As there is no need of water circulation in the system which upwards service system requires to keep the bed fixedly during stand by status, the electricity cost can be saved.

All in one - Complete packaged design
  As all the necessary equipment , piping, wiring and instrumentation is mounted on a skid at the factory, the installation work at site will be finished by setting the degasifier to the skid.

< Specification and dimensions >

Model PPB-550 PPB-850 PPB-1100 PPB-1250 PPB-1400 PPB-1600
Diameter
(mm)
550 850 1100 1250 1400 1600
Rated flow
(m3/h)
15 35 60 75 100 130
Main
pipe size
40A65A 40A80A 50A100A 65A125A 65A125A 80A150A
2B2T Type
Dimension
WL (mm)
1500
4400
1800
4400
2100
4900
2200
5400
2400
5300
2700
5700
2B3T Type
Dimension
WL (mm)
1500
5900
1800
6300
2100
6800
2200
7600
2400
6900
2700
7300
(Note) Keep the space of about 1 meter in front of and behind the skid for the operation and the maintenance.
2B2T Type
Erection weight
(tons)
4 6 8 9 10 11
2B2T Type
Operating weight
(tons)
7 12 15 18 22 28
2B3T Type
Erection weight
(tons)
5 7 10 11 13 14
2B3T Type
Operating weight
(tons)
9 15 19 22 28 34


Important noticeCopyright(c) Mitsubishi Chemical Aqua Solutions Co., Ltd.